Template information

Home » » Lowongan Kerja PT Supraco Indonesia Juli 2013

Lowongan Kerja PT Supraco Indonesia Juli 2013

Written By preview on Kamis, 18 Juli 2013 | 03.44




Lowongan Kerja 2013 Juli Supraco Indonesia
PT Supraco Indonesia, sejarah berdiri pada tahun 1979 dengan nama PT. Summa Prakarsa Korporasi bertujuan. Bergerak dalam bisnis peyedia layanan lokal untuk minyak asing dan perusahaan gas di Indonesia. Saat ini PT. Supraco Indonesia memperluas kegiatan usahanya dalam bentuk Basis Terpadu Manajemen Logistik, Offshore Supply Crane dan Pemeliharaan, Peralatan Berat dan masih banyak lagi. Client kami diantaranya Caltex Pacific Indonesia, BP Indonesia, Total, Unocal, CNOOC, ConocoPhillips, Amerada Hess

PT Supraco Indonesia saat ini sedang mencari kandidat terbaik untuk mengisi posisi melalui Lowongan Kerja Terbaru 2013 sebagai:

1. Regulatory & Permit Site Interface (CP-A221)

RESPONSIBILITY AND DUTIES:
Onsite representative for all environmental, regulatory and permitting issues
Coordinate ongoing efforts to identify and obtain various permits for scope of work in a timely manner to comply with national, provincial and local (Indonesian) rules and regulations
Interface with the E&R functional group to support project activities and implement best practices and lessons learned
Work and participate with project team and functional group on preparation of project support documents, such as Environmental Management Plan (EMP), Waste Management Plan (WMP), Spill Prevention and Response Plans (SPRP), protection of surface water and other related studies for the project
Support in selecting third party consulting services with respect to Oil Spill Response Plan (OSRP) preparation and development in coordination with Functional group and Productions
Interface with project engineering and construction resources on project design and implementation details required to satisfy project permit and environmental requirements
Develop Environmental Standard e.g. stream crossing, erosion control, etc
Coordinate development and submittal of EMCAPS deliverable for regulatory compliance plan (RCP) and environmental management plan (EMP) for project facilities
Supervise, monitor and review the plan of the implementation environmental protection measure according to RKL and RPL (environmental monitoring and management plan) during construction which is performed by third party environmental consultants
Interface and coordinate activities with E&R functional group, as appropriate, on preparation of permitting plans and government agencies/inspector interface
Review the RKL/RPL report for socioeconomic issue developed by EPC Contractor prior submitting to functional group in Development
Review and endorse EPC contractor environmental and regulatory documents and deliverables, as prescribed in project Coordination Procedure
Prepare project internal environmental and regulatory stewardship reports, as well as external reports required to satisfy Government or external financial institution conditions/requests
Assist project team, as appropriate, on the field inspection, special tasks and studies related to overall SH&E and permitting requirements.
Support the E&R functional group on Regframe implementation and implement regular environmental compliance assessments as part of the OIMS requirements for the project.
Ensure the implementation of the Upstream EMDC Environmental Standard is adhered to appropriately and align with Corporate Environmental guidance
Implement and assist training in environmental standard and technologies to EPC Contractor

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
Broad technical and SH&E skills with basic understanding of project management and SH&E functional work processes
5+ years broad-based experience preferred, in environmental compliance and impact mitigation related to oil and gas industry, processing and transportation, with prior experience in one or more SH&E-related disciplines
process, and in particular SH&E and OIMS deliverable requirements
Knowledge of EMDC strategies and key business drivers
Good interpersonal and communication skills
Knowledge of EMCAPS
Adaptable to changing priorities
Placement: Jakarta Base

2. Civil / Structural Inspector Infrastructure Facilities (CP-A222)

RESPONSIBILITY AND DUTIES:
Oversee inspection of structural activities conducted at contractors and sub-contractors facilities.
Coordinate with other structural.
Review original material certificates for compliance to codes and specifications
Ensure testing, measuring, welding, and NDE equipment is fully calibrated and has current certification
Ensure storage and use of welding consumables is per manufactures recommendations and full certification
Review Contractors field inspection and test reports
Verify fabrication fit-up, alignment, and dimensional tolerances
Review welder qualifications certifications, and attend welder qualification
Verify Contractor, Subcontractor Quality management systems, plans, procedures, and processes are in place.
Implement project Construction Surveillance Program

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
Working Knowledge of:
- Piping and pressure vessel codes and quality standards (E.g. AWS D1.1, CSA B51, ASME Section III, ASME B31.3, and ISO 9001)
- Piping fabrication methods
- Welding processes and NDE techniques including evaluation methods
- Piping, Isometrics and shop Drawings
Trained to authorize work permits (e.g. hot work, confined space, etc.)
Good oral and written English language skills
Well versed in safe work practices
Demonstrated ability to communicate in multiple languages
Minimum fifteen (15) years experience in inspection of piping systems on major onshore construction projects.
Skills and experience in the development of commissioning and start-up budget,.
Skills and experience in the development of manpower and vendor support mobilization/demobilization plan and schedules, and the development of lists of required commissioning and start-up spares, consumables, first-fills, special tools, temporary equipment, etc.

Qualifications:
Bachelor degree in a related field is preferable and is a plus
Certificates in planning and budgeting from recognized institutions are preferable
Advance skill in project planning with Primavera and MS Project is a must
Advance skill in the computer application software required in the project (Word, PowerPoint, Excel, etc.) is a must
Advance skills in project estimating and budgeting is a must
Placement : Cepu Site

3. E&I Construction Tech Foreman Field Facilities (CP-A223)

RESPONSIBILITY AND DUTIES:
monitor construction and fabrication of E&I activities conducted at Contractors / Sub-Contractors facilities and in the field
Participate in receiving inspection of E&I items at site and monitor the preservation program for the same until hand over
Promote safety awareness and safe performance among project team members, including consultants and contractor personnel
Support Construction Site Manager in monitoring and appraising the contractors performance for safety, quality, cost, and schedule; ensure that appropriate corrective actions are taken when needed
Verify physical progress
Monitor mechanical acceptance and start-up activities between operating unit and contractor
Assist PMT in meeting OIMS expectations as required, especially OIMS Element 2 (Risk Assessment), OIMS Element 3 (Facility Design & Construction), OIMS Element 9 (Incident Investigation) and OIMS Element 10 (Community Awareness)
Review or assist in reviewing E&I QC documents such as QA plans and pre-commissioning procedures
Jointly develop E&I inspection check lists or review the check lists generated by the Contractor for compliance to project requirements
Ensure quality processes are followed for instrument calibration at contractor facilities and / or in the field for permanent project materials and temporary test instruments / equipments used in E&I construction works
Co-ordinate with Contractor and Quality on cable tray routing and installation inspection
Monitor construction of electrical and instrumentation facilities and ensure they are completed as per approved engineering documentation and project specifications.
Witness installation of E&I control panels (both local and inside the control rooms)
Monitor and witness continuity and meggering inspection works for cables
Monitor cable laying works in trenches, through ducts and on cable trays
Monitor loop checks and review records for the same in accordance with technical requirements
Monitor construction and installation and testing of instrument tubing works
Review Contractors field inspection and test reports and ensure that inspections are carried out as per approved ITP requirements
Assist and co-ordinate with other disciplines on electrical motors installation and alignments
Interface, participate or co-ordinate in E&I pre-commissioning activities as required
Preparation of punch lists
Verify Contractor / Subcontractor Quality management systems, plans, procedures, and processes are in place. Implement project Construction Surveillance Program.

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
Minimum ten (10) years experience in inspection of E&I works on major onshore construction projects out of which at least 3 years experience senior E&I construction position
Experienced in witnessing SAT (Site Acceptance Tests) and FAT (Factory Acceptance Tests) of Electrical & Instrument control systems
Exposure to DCS instrumentation works and commissioning of the same
Thorough knowledge on International standards on E&I like IEC etc.
Knowledge on applicable Indonesian MIGAS regulations for E&I works is preferred
Well versed in safe work practices
Computer literate with experience in using MS Office suite for preparing reports and maintaining data base
Placement : Cepu Site

4. Civil Geotechnical Inspector Infrastructure Facilities (CP-A224)

RESPONSIBILITY AND DUTIES:
Site supervision of ground investigation fieldworks contracts ensuring compliance with specification and common practice.
Inspect geotechnical instrumentation design and installation.
Site supervision of pile installation works including pile loading and integrity testing.
Evaluating recommended countermeasures for low strength soils in contact with structural foundations.
Verify proper dam foundation slope stabilization and structures, including soil blending of native and borrow materials.
Site supervision of installation of of river water intake.
Supervision of earthworks placement and verification testing.
Verification dam contraction procedures are followed

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
Working Knowledge of:
o Soil Mechanics field tesing methods, including determining Vane Shear Strengths in cohesive soils using ASTM D 2573 method and Cone Penetration Test per ASTM D3441.
o Testing of swelling and dispersive soils (E.g. Emerson class number, double hydrometer or Pinhold).
o Rules and Regulations for Dam Safety and Dam Construction in Indonesia.
o Seepage Analysis and Control for Dams (E.g. U.S. Army Corps of Engineers EM 110-2-1901)
Degree in Civil/Geotechnical/Geological Engineering. 15 years of relevant experience.
Proven design investigation and analysis of geotechnical civil engineering.
Well versed in safe work practices.
Demonstrated ability to communicate in multiple languages
Computer literate with experience in using MS Office suite for preparing reports and maintaining data base
Thorough understanding of applicable project specifications
Trained to authorize work permits (e.g. hot work, confined space, etc.)
Good oral and written English language skills
Placement : Cepu Site

5. Environment, Regulatory & Socioeconomic Interface (CP-A225)

RESPONSIBILITY AND DUTIES:
Coordinate ongoing effort to obtain various permits for EPCs scope of work in a timely fashion in order to remain in compliance with National, Province, and Local regulations.
Interface with the functional groups as necessary to access timely support for project activities, identify/implement best practices and lessons learned
Work with PMT and Functional groups to support development of documents such as oil spill response plan and waste management plan.
Interface with project engineering and construction to ensure environmental and regulatory compliance.
Coordinate development and submittal of EMCAPS regulatory compliance and environmental management plans for project facilities
Work with consultants, as necessary, to prepare and submit requisite environmental, regulatory and socioeconomic impact assessments.
Interface and coordinate activities with functional groups, as appropriate, to develop and implement appropriate plans for interfacing with Non-Governmental Organisations (NGOs) and Government agencies.
Review and advise PMT about EPC contractors environmental, regulatory and socioeconomic documents and deliverables, as prescribed in project Coordination Procedure.
Prepare project internal environmental, regulatory and socioeconomic stewardship reports, as well as external reports required to satisfy Government or external financial institution conditions/requests.
Assist project team, as appropriate, on special tasks and studies related to overall Environmental and Regulatory permitting requirements, and community affairs at shore tie-in and offshore work sites.
Develop amicable relationships to facilitate open communication and transparency in processes and procedures with various Government offices (BPMIGAS, Sea Com, etc) that are responsible for issuing recommendations and approvals for regulatory and environmental permits.
Work closely with ITS to exploit full benefits of the work scope for which ITS has been contracted.

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
Broad project management, technical and SH&E skills with good understanding of working in a project setting and an ability to interact amicably with various external stakeholders
5+ years broad-based experience preferred, with prior experience in one or more related disciplines (i.e. Environmental, Regulatory and Socioeconomic)
Experience interfacing with NGO and other similar organisation
Knowledge of EMCAPS process, and in particular SH&E deliverable requirements
Knowledge of EMDC strategies and key business drivers
Good interpersonal and communication skills in English and Bahasa Indonesia. Ability to speak Jawanese is an additionally desirable attribute.
Adaptable to changing priorities as focus of activity is expected to vary between the three disciplines.
Willingness to undertake business travel and/or field based short term assignments
Ability to interact proactively in the Projects interest, with EPC contractor, local Government offices and local community in East Jawa province.
Placement : Jakarta Base

6. Crane Inspector (CP-A226)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
Minimum S1 Engineering with around 3 years experience
Experience with Crane Inspection in Oil & Gas
MIGAS Crane certification
Fluent in English, written & spoken
Wiliing to be place anywhere around Indonesia
Permanent status is possible

7. Rotating Inspector (CP-A227)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
Minimum S1 Engineering with around 3 years experience
Experience with Rotating Inspection in Oil & Gas
MIGAS Rotating certification
Fluent in English, written & spoken
Wiliing to be place anywhere around Indonesia
Permanent status is possible

8. Pressure Vessel Inspector (CP-A228)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
Minimum S1 Engineering with around 3 years experience
Experience with Pressure Vessel Inspection in Oil & Gas
Familiar with Design Drawing
MIGAS Pressure Vessel certification
Fluent in English, written & spoken
Wiliing to be place anywhere around Indonesia
Permanent status is possible

9. Electrical Inspector (CP-A229)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
Minimum S1 Engineering with around 3 years experince
Experience with Onshore Construction Electrical Inspection in Oil & Gas
Familiar with Design Drawing
MIGAS Electrical certification
Fluent in English, written & spoken
Wiliing to be place anywhere around Indonesia
Permanent status is possible

10. Pipeline Inspector (CP-A230)

REQUIRED KNOWLEDGE, QUALIFICATIONS, SKILLS, AND EXPERIENCES:
Minimum S1 Engineering with around 3 years experince
Experience with Onshore Pipeline Inspection in Oil & Gas
Familiar with Design Drawing
MIGAS pipeline certification
Fluent in English, written & spoken
Wiliing to be place anywhere around Indonesia
Permanent status is possible

Please send your application with detailed resume and recent photograph and put job title name and code on subject email to: 

PT Supraco Indonesia 
Email : recruitment@supraco.com 
Expired : 31 Juli 2013

More Jobs



Search Result

Lowongan Memerlukan Karyawan Lowongan Tambang PT Supraco Indonesia Juli 2013 di Indonesia pada 04 Agustus 2013. Data Perusahaan Kosong - Data Kota Kosong - 04 Agustus ,Lowongan Kerja Supraco Indonesia | Kalimatan Timur, Lowongan Kerja Kaltim | Balikpapan | Samarinda, Lowongan Kerja Supraco Indonesia | Kalimatan Timur,Lowongan Migas Juli 2013 di PT Supraco Indonesia, Info Lowongan Pekerjaan terupdate, Lowongan Migas Juli 2013 di PT Supraco Indonesia,Lowongan Kerja Terbaru 2013. Bank/Finance; BUMN; CPNS. Badan POM; BNN; BPK; Semoga informasi Lowongan Oil Company PT Supraco Indonesia jobs vacancies 2012 ,Lowongan Tambang PT Supraco Indonesia Juli 2013 penulis lepas bahasa indonesia juli 2013, ms rim, lowongan kerja di kebon jeruk jakarta barat untuk , lowongan kerja terbaru pt supraco indonesia, lowongan kerja daerah pajajaran bogor juli 2013; lowongan kerja bagian quality control juli 2013 di pulo gadung;,Lowongan Kerja Supraco Indonesia Terbaru Juli 2013, PT. Supraco Indonesia was founded in 1979 with the name of PT. LOWONGAN KERJA JULI 2013,Lowongan kerja Deckhand Pt Supraco Indonesia Balikpapan Juli 2013. Pencarian Lowongan Kerja. Lowongan Deckhand Pt Supraco Indonesia Balikpapan Juli 2013 (0 Lowongan),Lowongan kerja Rigger Pt Supraco Indonesia Balikpapan Juli 2013. Pencarian Lowongan Kerja. Lowongan Rigger Pt Supraco Indonesia Balikpapan Juli 2013 (0 Lowongan),Lowongan Kerja Juli 2013, Lowongan Kerja Terbaru Juli 2013, Lowongan Kerja 2013, PT Supraco Indonesia (SPC) was founded in 1979 with the name of PT.

0 comments:

Poskan Komentar

Diberdayakan oleh Blogger.